HTH Liquid Floc clears very cloudy pool water by removing large amounts of suspended debris.

• Concentrated source of aluminium floc
  
• Removes dead algae following shock treatment
• No pre-dissolving required
  

DO NOT USE WITH DIATOMITE FILTRATION SYSTEMS.
DO NOT MIX WITH OTHER PRODUCTS.

Instructions

Calculate the volume of water in the pool using our handy pool water calculator.

Once floc has settled on the pool floor, carefully vacuum as much as possible to waste - removing any remainder by normal filtration.

Caution: Do not run the filter when using Liquid Floc.

Warning: Do not use together with other products. May release dangerous gases (chlorine).

Precautions: Never mix chemicals, except by dosing into the pool separately and at different times. Never add chemicals to the water when bathers are in the pool. Store in a cool, dry, well ventilated, secure place away from oxidising and reducing agents, eg, petrol, oil, solvents and organic materials; ammonia, fertiliser and nitrogen compounds; strong acids and alkalis. Avoid direct contact with pool chemicals. Should there be skin contact with chemicals, wash thoroughly.

Disposal When empty and providing it has been rinsed out on the pool. this container may be disposed of via household recycling.